Our Services
Calibration pressure transducer
In the following video we will show the calibration of Puffe pressure transducer
Pressure transducer raw signal adjustment
In the following video we will show how pass on the damped signal to the PLC.
We do not recommend this setting because without stray ground stray voltages that influence the cables are forwarded!
Increase the resolution of the transducer
If the display shows whole digits without decimal place.
Than displayed signal is also output as analog value.
This means that the output signal changes in 1 bar steps.
In order to increase the resolution of the analog signal, 2 decimal places must be activated.
The video shows how to set 2 more digits.
In the following video we will show how pass on the damped signal to the PLC.
We do not recommend this setting because without stray ground stray voltages that influence the cables are forwarded!